High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
Includes: Basic UPS signalling RS-232 cable, CD with software, Rack mounting brackets, USB cable, User manual
Run time for load Min-max : 80-800 W 800 W 3m 49s
Max. Capacity Used : 100%
Output power capacity : 800 Watts / 1.0kVA
Rack Height : 2U
Output Connections : (3) IEC 60320 C13 (Battery Backup) (3) IEC 320 C13 (Battery Backup)
Nominal Output Voltage : 230V
Nominal Input Voltage : 230V
Input Connections : IEC 60320 C14
Cord Length : 1.5meters
Automatic internal bypass :
– Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Automatic restart of loads after UPS shutdown :
– Automatically starts up the connected equipment upon the return of utility power.
ECO Mode :
– Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Input power factor correction :
– Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management :
– Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intelligent Card Slot :
– Customize UPS capabilities with management cards.
LCD graphics display :
– Text and mimic diagrams that display modes of operation, system parameters and alarms.
Serial connectivity :
– Provides management of the UPS via a serial port.
USB connectivity :
– Provides management of the UPS via a USB port (not available on all models).
– Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.
Safety-agency approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Allows the user to manage the UPS functions, schedule automatic shutdown and monitor the power grid occurrences through an interactive interface that ensures an easy and intuitive monitoring. : Management Software
Double conversion on-line topology : Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Management Software : Allows you to easily monitor your utility power and manage your UPS.
Pure sine wave output on battery : Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Intuitive LCD interface : Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
ECO Mode : Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Generator compatible : Ensures clean, uninterrupted power to protected equipment when generator power is used.
High efficiency : High efficiency rates that remain stable even at lower operating power levels
Input power factor correction : Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent Card Slot : Customize UPS capabilities with management cards.
LCD graphics display : Text and mimic diagrams that display modes of operation, system parameters and alarms.
LED Indicators : Provide easy-to-read status of the unit and utility power conditions.
Network manageable : Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Serial connectivity : Provides management of the UPS via a serial port.
Predictive failure notification. : Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification : Warns when a battery is not available to provide backup power.
Audible alarms : Provides notification of changing utility power and UPS power conditions
Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Max Configurable Power (Watts) : 800 Watts / 1.0kVA
Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load : 88.0 %
Output Voltage Distortion : 3 %
Output Frequency (sync to mains) : 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages : 220 V, 240 V
Load Crest Factor : 3 : 1
Topology : Double conversion online
Waveform type : Sine wave
Bypass : Internal bypass (automatic and manual)
Input frequency : 40 – 70 Hz Auto sensing
Input voltage range for main operations : 110 – 285 Half load, 160 – 280 Full loadV
Number of Power Cords : 1
Efficiency at Full Load : 88.0 %
Other Input Voltages : 220 V, 240 V
Batteries & Runtime
Battery type : Lead-acid battery
Typical recharge time : 4hour(s)
Nominal Battery Voltage : 24 V
Expected Battery Life (years) : 3 – 5
Battery Charge Power (Watts) : 30 Watts
Runtime : View Runtime Graph
Efficiency : View Efficiency Graph
Communications & Management
Interface Port(s) : DB-9 RS-232, Smart-Slot, USB
Control panel : Multifunction LCD status and control console
Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Available SmartSlot™ Interface Quantity : 1
Surge Protection and Filtering
Surge energy rating : 600Joules
Maximum Height : 223MM, 22.3CM
Maximum Width : 145MM, 14.5CM
Maximum Depth : 288MM, 28.8CM
Net Weight : 9.3KG
Shipping weight : 10.6KG
Shipping Height : 330MM, 33.0CM
Shipping Width : 235MM, 23.5CM
Shipping Depth : 365MM, 36.5CM
Color : Black
Operating Temperature : 0 – 40 °C
Operating Relative Humidity : 0 – 95 (Non-condensing) %
Operating Elevation : 0 – 3000meters
Storage Temperature : -20 – 50 °C
Storage Relative Humidity : 0 – 95 (Non-condensing) %
Storage Elevation : 0 – 15000meters
Audible noise at 1 meter from surface of unit : 50.0dBA
Online thermal dissipation : 372.0BTU/hr
Protection Class : IP20
Approvals : CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, TISI
Standard warranty : 2 years repair or replace
Sustainable Offer Status
RoHS : Compliant