Gambar UPS APC BR650MI Back-UPS Pro 650VA, 230V, AVR, LCD, 6 IEC outlets

APC Back-UPS Pro 650VA, 230V, AVR, LCD, 6 IEC outlets

High Performance Computer and Electronics UPS for Premium Power Protection

Key Features BR650MI
– Run time for load Min-max: 39-390 W 390 W 2m 44s
– Max. Capacity Used : 100%
– Output power capacity : 390 Watts / 650VA
– Output Connections : (6) IEC 60320 C13 (Battery Backup)
– Nominal Output Voltage : 230V
– Nominal Input Voltage : 230V
– Input Connections : IEC 60320 C14

Audible alarms :
Provides notification of changing utility power and UPS power conditions
Automatic self-test : 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Voltage Regulation (AVR) : 
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Battery failure notification : 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools : 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets : 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR) : 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable : 
Provides temporary battery power when the utility power is out.
Dataline surge protection : 
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification : 
Warns when a battery is not available to provide backup power.
Green mode : 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Hot-swappable batteries : 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
LCD graphics display : 
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Safety-agency approved : 
The UPS is UL1778 Listed
USB connectivity : 
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries : 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Pro Features & Benefits

“Manageability”
LCD Status Display : Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
USB connection : Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms : Provides notification of changing utility power and UPS power conditions
Disconnected battery notification : Warns when a battery is not available to provide backup power.

“Availability”
Customizable voltage sensitivity : 
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
Customizable voltage-transfer points : 
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
Green mode : 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Intelligent battery management : 
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test : 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification : 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Boost and Trim Automatic Voltage Regulation (AVR) : 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Cold-start capable : 
Provides temporary battery power when the utility power is out.
Transformer-block spaced outlets : 
Protect equipment with input transformer blocks without blocking access to other receptacles.

“Protection”
Battery and surge protected outlets : Back up and protect your hardware and data during power outages, surges and spikes .
Dataline surge protection : Provides protection of connected equipment from power surges on the data lines.
Surge only outlets : Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

“Marketing features”
Battery-protected and surge-only outlets : 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost Automatic Voltage Regulation (AVR) : 
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Serviceability
Resettable circuit breaker : Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Simple battery replacement : Increases UPS availability by allowing quick, easy battery replacement.

“Safety”
Safety-agency approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical Specifications BR650MI

Output
– Max Configurable Power (Watts) : 390 Watts / 650VA
– Output Frequency (sync to mains) : 50/60 Hz +/- 1 Hz Sync to mains
– Topology : Line interactive
– Waveform type : Stepped approximation to a sinewave
– Transfer Time : 10 ms typical : 12 ms maximum

Input
– Input frequency : 50/60 Hz +/- 3 Hz Auto-sensing
– Input voltage range for main operations : 176 – 294V

Batteries & Runtime
– Battery type : Lead-acid battery
– Typical recharge time : 12hour(s)
– Nominal Battery Voltage : 12 V
– Replacement Battery : APCRBC110
– Expected Battery Life (years) : 3 – 5
– RBC Quantity : 1
– Battery Charge Power (Watts) : 6 Watts
– Runtime : View Runtime Graph
– Efficiency : View Efficiency Graph

Communications & Management
– Interface Port(s) : USB
– Control panel : Multifunction LCD status and control console
– Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering
– Data Line Protection : RJ45 network line – 10/100/1000 Base-T Ethernet
– Filtering : Full time multi-pole noise filtering : 10% of IEEE surge let-through : zero clamping response time: instantaneous

Physical
– Maximum Height : 190MM, 19.0CM
– Maximum Width : 91MM, 9.1CM
– Maximum Depth : 310MM, 31.0CM
– Net Weight : 6.4KG
– Shipping weight : 7.4KG
– Shipping Height : 255MM, 25.5CM
– Shipping Width : 440MM, 44.0CM
– Shipping Depth : 143MM, 14.3CM
– Master Carton Dimensions (Length x Width x Height) : 279 x 457 x 229MM
– Master Carton Units : 2.0
– Master Carton Weight : 15.65
– SCC Codes : 10731304346934

Environmental
– Operating Temperature : 0 – 40 °C
– Operating Relative Humidity : 0 – 95 %
– Operating Elevation : 0 – 3048meters
– Storage Temperature : -15 – 45 °C
– Storage Relative Humidity : 0 – 95 %
– Storage Elevation : 0 – 15240meters
– Audible noise at 1 meter from surface of unit : 45.0dBA
– Online thermal dissipation : 13.0BTU/hr

Conformance
– Approvals : A-Tick, C-Tick, CE, EAC, GS Mark, RCM, TISI
– Standard warranty : 2 years repair or replace, 3 years repair or replace for European Union countries

Sustainable Offer Status
– RoHS : Compliant

Software Original
×

Software-Original.Com

× Contact Us