Oriana Rockware

Oriana Rockware
Circular data statistics software
Oriana for Windows calculates the special forms of sample and inter-sample statistics required for circular data. It also graphs your data in a variety of ways, allowing you to easily demonstrate patterns. These analyses and graphs are rarely found in other statistical packages.

Contact US

Informasi Produk, Harga, atau Request Penawaran Harga :

Software-Original Office :

Komplek Ruko Bahan Bangunan Blok F7 No.8

Jl. Arteri Mangga Dua Raya Kel. Mangga Dua Selatan, Kec. Sawah Besar - Jakpus 10730

Senin – Jum’at: 08.30 – 17.30

Sabtu: 08.30 – 12.00

Contact US (Fast Response):

Email : cs@software-original.com

WhatsApp And Call :

Telp

0898 180 3131

Oriana Rockware
Perangkat lunak statistik data melingkar

Oriana untuk Windows menghitung bentuk khusus dari sampel dan statistik antar sampel yang diperlukan untuk data melingkar. Ini juga membuat grafik data Anda dalam berbagai cara, memungkinkan Anda mendemonstrasikan pola dengan mudah. Analisis dan grafik ini jarang ditemukan dalam paket statistik lainnya.

Analisis
Oriana menghitung berbagai statistik sampel tunggal serta perbandingan antar sampel. Statistik dasar meliputi rata-rata melingkar, panjang vektor rata-rata, standar deviasi melingkar dan batas kepercayaan 95% dan 99%. Ada juga sejumlah uji distribusi sampel tunggal, seperti uji keseragaman Rayleigh dan uji jarak Rao. Sampel dapat dibandingkan dengan berbagai pengujian seperti uji Watson-Williams atau uji Mardia-Watson-Wheeler. Korelasi antar sampel juga dapat dihitung. Daftar lengkap analisis dapat ditemukan di sini.
Hasil analisis disajikan dalam format tabel, siap untuk ditempelkan langsung ke pengolah kata Anda untuk laporan atau manuskrip.
Jumlah variabel dan kasus yang dapat dianalisis Oriana hanya dibatasi oleh jumlah memori yang terpasang dan ruang disk (maksimum hingga 2 miliar).

Graphics
A variety of graph types are available in Oriana. The data for each set of observations can be summarized with rose diagrams or circular histograms. The rose diagram/histogram bars can be stacked to show the relative proportions of subsets within the data. Linear histograms can also be plotted.
Linear data can be incorporated into two variable rose diagrams or histograms as well as in vector plots, where an arrow or bar is drawn for each case, with the length representing the linear data, and circular scatterplots.
Individual observations can be shown in raw data plots. Distribution plots allow you to assess whether the data depart from a uniform or von Mises distribution. The distributions of two sets of observations can also be compared with Q-Q plots, and regular scattergrams can also be produced.
Various aspects of the appearance of the graph can be modified, including fonts, colors of lines, objects and background, and text of titles and axis labels. When the graphs are ready you can print them to any Windows printer, save to various graphic formats, or copy and paste them to any other Windows application.

Features Oriana Rockware
A. ORIANA DATA HANDLING
Oriana can natively handle a wide variety of data types.
- Built-in spreadsheet-like data editor; supports cut and paste between applications.
- Circular data types:
-- Angles (unidirectional and bidirectional [axial])
-- Time of day
-- Compass direction
-- Day of week
-- Month of year
-- Week of year
-- Day of year
-- Proportional and percentage (like Angles, but scaled 0-1 or 0-100 rather than 0-360)
-- Lunar cycle

- Non-circular data types:
-- Date
-- Linear numerical
-- Label
-- Subgroups

- Flexible data handling; sets of data can be entered as separate columns (the old Oriana ver. 1 method) or can be entered pairwise with other data (linear, dates, labels, other circular data).
- With the paired method a file can also have one or more grouping variables added to allow for analysis of subgroups of data. Subgrouping can also be performed on existing data (such as the date, summarized in different ways).
- Frequency data can be entered either directly into the spreadsheet as a frequency table or through a special frequency editing mode that expands the frequencies into a single column of raw data.
- Data can be filtered, restricting analyses and graphs to just cases that meet a certain criterion (e.g. Angle > 90 or Month = June).
- Circular data can be entered as x/y coordinates defining the beginning and ending point of a vector. They can then be converted to vectors (angle and length) for analysis.
- Variables can be automatically filled with identical, incrementing or random (uniform or von Mises) data.
- An optional file creation wizard aids in the process of setting up new data files.
- Dates can be summarized into day of week, month of year, week of year or day of year.

- Data transformation:
-- Data entered or imported in radians can be converted to degrees for analysis.
-- Linear data can be standardized and log or square root transformed.

- A Find and Replace facility lets you search for particular data points and make global changes.
- Data can be sorted.
- Grouped circular data (data recorded approximately to the nearest interval, such as every 20° or every hour, rather than exactly) are automatically detected and flagged (with user confirmation) so that statistical analyses are adjusted accordingly, where relevant.
- Missing data capability with pairwise deletion where required.
- Several Oriana data files can be merged into a single file.
- Import and export from/to Excel (both .XLS and .XLSX), Lotus 123, Quattro, dBase, Paradox, ASCII text.
- Number of cases and variables limited only by available memory and disk space.

B. ORIANA ANALYSES
Oriana calculates a variety of single sample statistics as well as inter-sample comparisons.

- Basic statistics
-- circular mean,
-- length of mean vector (r),
-- median angle
-- circular variance, standard deviation and standard error
-- 95% and 99% confidence interval for the mean vector.
-- mean weighted by linear variable, plus basic statistics for the linear variable itself
-- means and mean vector lengths can be saved to a file for further second order analysis.

- One-sample tests
-- Rayleigh’s test of uniformity
-- Hotelling’s test for weighted data
-- Moore’s modified Rayleigh test for weighted data
-- Rao’s spacing test
-- Chi-Squared
-- V-Test
-- Watson’s U²
-- Kuiper’s.
The last two can be used for tests against both the uniform and von Mises distribution.

- Two-sample tests
-- Watson-Wheeler F-test
-- Chi-squared test
-- Mardia-Watson-Wheeler test
-- Watson’s U² test.
-- Hotelling’s paired multisample test
-- Moore’s paired multisample test (nonparametric)

- Multisample tests – The first three two-sample tests above can also be performed as multi-sample tests.
- Circular-circular and circular-linear correlations.

- Second order statistical analysis:
-- Grand mean angle, length and confidence limits
-- Hotelling’s one sample second order test
-- Moore’s modified Rayleigh test for second order analyses
-- Hotelling’s two sample second order test
-- Mardia’s two sample second order test (nonparametric)
-- Hotelling’s paired sample second order test
-- Moore’s paired sample second order test (nonparametric)

- All analyses can be performed on subgroups of data as well as the whole data set.

C. ORIANA GRAPHICS
A variety of graph types are available in Oriana.

- Graph types include
-- Rose diagrams
-- Circular histograms
-- Linear histograms
-- Arrow graphs – like a histogram, but an arrow is used for each class rather than a bar or wedge
-- Raw data plots
-- Distribution graphs – plot data against expected distribution for either uniform or von Mises distributions.
-- Stacked and stepped circular histograms/rose diagrams- bars or wedges divided into segments to reflect the proportions of each subgroup within the data.
-- Stacked raw data plots – points representing each data point are colored according to their subgroup
-- Two-variable circular histograms – segments of each bar represents the classes of a second circular or linear variable (e.g. wind speed plotted as segments on bars representing wind direction)
-- Circular-linear plots – these incorporate linear data along with your circular data. An arrow, bar or wedge is drawn for each case, with the length representing the linear data.
-- Circular scatterplots – these also plot linear and circular data, with each data pair being plotted as points on a circular plot
-- X/Y Scatterplots – can plot any circular or linear variable on X/Y Cartesian axes.
-- Q-Q plot – compare distributions of two circular samples to assess whether they have the same distribution

- Mean and confidence limits can be shown on histograms. Mean can alternatively be represented by a mean vector, where the length of the arrow reflects the mean vector length (r).
- Circular graphs can have a circle showing the critical value of the Rayleigh test. The length of the r vector can then be compared to this circle to assess its significance.
- With paired vector data (consisting of angle and length) the mean vector can be weighted by the vector lengths.
- Axes can be extensively customized with regard to number of grid lines, scaling (linear, percentage or logarithmic), format and orientation of labels.
- Circular graphs can be drawn with the 0°/N point at user chosen position on the circle, and oriented either clockwise or counter-clockwise.
- Doubled-angle plots, which plot only the data between 0-180°, but spread around the full circumference of the circle, can be produced. This type of graph is used in fields such as ophthalmology.
- Circular-linear plots can have a standard deviation ellipse plotted (also used in opthalmology).
- Division of segments in two-variable histograms can be customized or manually defined.
- Bar width of histograms and rose diagrams can be changed.
- Rose diagrams can have frequency depicted by either radius or area of wedge.
- Linear histograms can be plotted as double width plots to emphasise cyclicity in data.
- Table of frequencies used to produce histograms can be displayed in the Results window.
- Graph types and options can be modified without having to create a new graph window.
- Graph appearance can be customized (fonts, color of axes, thickness of lines and grids, color of background of various sections, series of colors, patterns and symbols for stacked and subgrouped diagrams).

D. ORIANA USER INTERFACE
Oriana uses the KCS desktop metaphor. You can spread out your data, the statistical results and several graphs in front of you while you study them, just like paper on your desktop. Try new graphs, add new data, peruse the results, then print or save
- Written specifically for Microsoft Windows. Follows the normal Windows conventions, making it easy to learn and use alongside your other Windows applications. Intuitive menu structure and quick-access toolbar buttons.
- Uses the KCS desktop metaphor. All results and graphs for a single project can be spread out on screen. Contents and arrangement of windows can then be saved and recalled later, letting you pick up where you left off. Different projects can be saved in separate desktop files.
- Graphs and results appear in two tabbed notebooks (one for each), with each graph or page of results on separate pages.
- Results and graphs can be exported for inclusion in reports or manuscripts, using cut and paste. Results can also be saved to text files or Excel spreadsheets, and graphs can be saved in a variety of formats, including EMF, WMF, BMP, PNG, GIF and JPG.
- Data, results and graphs can be printed to any Windows printer or plotter. Different devices can be used for text and graphics.
- Results and graphs can be exported or printed individually or all at once.
- Inclusion of a notepad allows you to make notes about your analyses. These are saved along with the graphs and results in a desktop file, and can be copied or exported to your word processor.
- Customizable toolbars – you can arrange the toolbars at any point around the margin of the window or floating over the window, and you can choose which buttons to display on each toolbar.
- User can select from a number of different color schemes, many with attractive gradient effects.
- Automatically uses local language (as set in Windows) for names of months and days, and local format for times and dates. Compass direction abbreviations can be customized manually.
- Full on-line help and a comprehensive manual with tutorial.

E. NEW FEATURES IN ORIANA V.4
See what's new in Oriana v.4.

General Features
- New data type: lunar – Data are entered as dates but are treated as circular data based on the lunar month. This is useful when studying phenomena that might be related to lunar phase (e.g. turtles laying eggs during the full moon).
- Analyzing frequency data – Data can now be entered directly into the data editor as a frequency table, with one variable being the circular data and an associated Linear variable giving the frequency (number of observations for that circular measurement). These can then be used to produce histograms and basic stats.

Statistical Analyses
- Hotelling’s paired multisample test
- Moore’s paired multisample test (nonparametric)
- Hotelling’s test for weighted data
- Moore’s modified Rayleigh test for weighted data
- Second order statistical analysis: Grand mean angle, length and confidence limits
- Hotelling’s one sample second order test
- Moore’s modified Rayleigh test for second order analyses
- Hotelling’s two sample second order test
- Mardia’s two sample second order test (nonparametric)
- Hotelling’s paired sample second order test
- Moore’s paired sample second order test (nonparametric)

Data Handling
- Added option to save means and mean vector lengths to a file for further second order analysis.
- A new data transformation facility was added. Data entered or imported in radians can be converted to degrees for analysis. Also, linear data can be standardized and log or square root transformed.
- Added function to merge several Oriana data files into a single file

New Graph Options
- Added an option for circular plots to plot only the data between 0-180°, but spread around the full circumference of the circle. This type of graph is used in fields such as ophthalmology (doubled-angle plots).
- Added an option on circular-linear plots to plot the weighted mean as a centroid, along with an ellipse depicting the standard deviation of the data along the two major axes of the plot. This also is used in ophthalmological studies.
- Added option to have the degree symbol printed after the angle labels on graphs
- Added a new option for number of minor divisions on circular graphs (every 15°)
- Added plotting of the grand mean vector when subgroup means are included in histograms.

Other important features added in recent minor updates of version 3
- Data import and export now supports Excel 2007/2010 file format (.XLSX and .XLSM files). Export of results can now also be done to the newer Excel format.
- New Excel import routines more reliably detect times and dates in various international formats.
- Added a Guess Column Names option to find most likely row in an Excel file that contains column names.
- Selection of worksheet to import from Excel now done with tabs at the bottom of the preview grid rather than a drop-down box as before.
- Three new visual themes have been added: Office 2010 Blue, Silver and Black.
- Most simple information, warning and error dialog boxes now use Windows Vista/7-style Task Dialogs.

License :
- Oriana Single License
- Oriana Single License Academic
- Oriana Single License Upgrade v3-v4

Important Keywords :
Oriana Rockware, jual Oriana Rockware, harga Oriana Rockware, beli Oriana Rockware,
fitur Oriana Rockware, reseller Oriana Rockware, agen Oriana Rockware, distributor Oriana Rockware,

Reviews

There are no reviews yet.

Be the first to review “Oriana Rockware”

Your email address will not be published. Required fields are marked *

Software Original
×

Software-Original.Com

× Contact Us